Skip to Content

Amigurumi Robot Crochet Pattern

Español Français

The robot, the helping mechanical hand that will eventually eliminate all our problems in the household and sooner or later will replace us in our jobs and then actually eliminate us.

But until the rise of the machines, in which we are then kept as cheap labor, we can continue to enjoy these mostly very clumsy metal heads.

If you want to have a little mechanical friend of your own before they take over the world, you can crochet now your own little robot with this pattern.

This crochet robot is exclusively crocheted with chain stitches and single crochet stitches in spiral rounds and rows with increases and decreases and is therefore perfect for beginners.

The depicted amigurumi robot has been crocheted with the “Schachenmayr Catania” yarn with a 2.5 mm crochet hook and has sitting a height of 6.5 cm.

Buy the PDF Pattern

Keep scrolling for the free crochet pattern.

Free Robot Crochet Pattern

ATTENTION: The pattern, in whole or in parts, may not be published, resold, translated, changed or exchanged in any way whatsoever!

Needed Techniques

Needed Materials and Tools

To order the materials click on the respective link (affiliate link).

Sale
Gründl AD1407016-2.50 Crochet Hooks Swing, 16cm 2.50mm, Yellow
Gründl AD1407016-2.50 Crochet Hooks Swing, 16cm 2.50mm, Yellow
Size: 2.50mm; ERGONOMIC DESIGN: Relieves wrist and shoulder tension for hours of effortless crafting
$22.95 −$4.05 $18.90

Crochet the Head and Body

The head and body is crocheted in one piece in Smoke Gray and Anthracite in spiral rounds with single crochet stitches.

Use the check boxes to mark your finished rounds, rows and steps.

  • Crochet the head and body in spiral rounds in Smoke Gray.
  • Round 1: 4 sc into the Magic Ring (4 stitches).
  • Round 2: [3 sc into the next stitch] repeat till end of the round (12 stitches).
  • Round 3: 1 sc, [3 sc into the next stitch, 2 sc] repeat 3 times, 3 sc into the next stitch, 1 sc (20 stitches).
  • Round 4: 2 sc, [3 sc into the next stitch, 4 sc] repeat 3 times, 3 sc into the next stitch, 2 sc (28 stitches).
  • Round 5: 3 sc, [3 sc into the next stitch, 6 sc] repeat 3 times, 3 sc into the next stitch, 3 sc (36 stitches).
  • Round 6: Crochet the complete round into the back loop only. Crochet 36 sc (36 stitches).
  • Round 7-13: 7 rounds, each round 36 sc (36 stitches). Attach the eyes and then continue crocheting the next round.
  • Round 14: Crochet only 2 sc.
  • Round 15: Crochet the complete round into the back loop only. 3 sc, [sc 3 together, 6 sc] repeat 3 times, sc 3 together, 3 sc (28 stitches).
  • Round 16: 2 sc, [sc 3 together, 4 sc] repeat 3 times, sc 3 together, 2 sc (20 stitches).
  • Round 17: 1 sc, [sc 3 together, 2 sc] repeat 3 times, sc 3 together, 1 sc (12 stitches).
  • Round 18: Fill the head with polyfill, but not too tightly, otherwise the cube will become a ball. Crochet the complete round into the front loop only. Color change to Anthracite. Crochet 12 sc (12 stitches).
  • Round 19: Crochet the complete round into the front loop only. Color change to Smoke Gray. 1 sc, [3 sc into the next stitch, 2 sc] repeat 3 times, 3 sc into the next stitch, 2 sc (20 stitches).
  • Round 20: 2 sc, [3 sc into the next stitch, 4 sc] repeat 3 times, 3 sc into the next stitch, 2 sc (28 stitches).
  • Round 21: Crochet the complete round into the back loop only. Crochet 28 sc (28 stitches).
  • Round 22-26: 5 rounds, each round 28 sc (28 stitches).
  • Round 27: Crochet only 1 sc.
  • Round 28: Crochet the complete round into the back loop only. 2 sc, [sc 3 together, 4 sc] repeat 3 times, sc 3 together, 2 sc (20 stitches).
  • Round 29: Crochet the complete round into the back loop only. 1 sc, [sc 3 together, 2 sc] repeat 3 times, sc 3 together, 1 sc (12 stitches).
  • Round 30: Fill the body with polyfill, but not too tightly, otherwise the cube will become a ball. [sc 3 together] repeat 4 times (4 stitches).
  • Finish: Cut the yarn generously, close the opening, weave in and hide the leftover yarn.

Crochet the Legs (2x)

The legs are crocheted in Smoke Gray and Anthracite in spiral rounds with single crochet stitches. Crochet a total of 2 legs. The finished legs do not need to be filled with polyfill.

  • Crochet the legs in spiral rounds in Smoke Gray.
  • Round 1: 4 sc into the Magic Ring (4 stitches).
  • Round 2: [3 sc into the next stitch] repeat till end of the round (12 stitches).
  • Round 3: Crochet the complete round into the back loop only. Crochet 12 sc (12 stitches).
  • Round 4-5: 2 rounds, each round 12 sc (12 stitches).
  • Round 6: Crochet the complete round into the back loop only. Color change to Anthracite. [1 decrease] repeat till end of the round (6 stitches).
  • Round 7: Crochet the complete round into the back loop only. Crochet 6 sc (6 stitches).
  • Finish: Cut the yarn generously and leave a long tail for sewing.

Crochet the Arms (2x)

The arms are crocheted in Smoke Gray and Anthracite in spiral rounds with single crochet stitches. Crochet a total of 2 arms.

  • Crochet the arms in spiral rounds in Smoke Gray.
  • Round 1: 6 sc into the Magic Ring (6 stitches).
  • Round 2: [1 increase] repeat till end of the round (12 stitches).
  • Round 3: Crochet 12 sc (12 stitches).
  • Round 4: [1 decrease] repeat till end of the round (6 stitches).
  • Round 5: Crochet the complete round into the back loop only. Color change to Anthracite. Crochet 6 sc (6 stitches).
  • Round 6: Crochet the complete round into the back loop only. Crochet 6 sc (6 stitches).
  • Finish: Fill the arms with a little bit of polyfill. Cut the yarn generously and leave a long tail for sewing.

Crochet the Eyebrows (2x)

The eyebrows are crocheted in Anthracite in rows with chain stitches. Crochet a total of 2 eyebrows.

  • Crochet the eyebrows in rows in Anthracite.
  • Round 1: Crochet 3 chain stitches (3 stitches).
  • Finish: Cut the yarn generously and leave a long tail for sewing.

Crochet the Receiver (2x)

The receivers are crocheted in Anthracite in spiral rounds with single crochet stitches. Crochet a total of 2 receivers.

  • Crochet the receivers in spiral rounds in Anthracite.
  • Round 1: 6 sc into the Magic Ring (6 stitches).
  • Round 2: [1 increase] repeat till end of the round (12 stitches).
  • Round 3: Crochet the complete round into the back loop only. Crochet 12 sc (12 stitches).
  • Round 4: Crochet only 1 sc.
  • Finish: Cut the yarn generously and leave a long tail for sewing.

Crochet the Antenna

The antenna is crocheted in Capri and Anthracite in spiral rounds with single crochet stitches.

  • Crochet the antenna in spiral rounds in Capri.
  • Round 1: 6 sc into the Magic Ring (6 stitches).
  • Round 2: [1 increase] repeat till end of the round (12 stitches).
  • Round 3: [1 decrease] repeat till end of the round (6 stitches).
  • Round 4: Crochet the complete round into the back loop only. Color change to Anthracite. [1 sc, 1 decrease] repeat 2 times (4 stitches).
  • Round 5: Crochet 4 sc (4 stitches).
  • Round 6: [1 sc, 1 increase] repeat 2 times (6 stitches).
  • Round 7: Crochet the complete round into the front loop only. [1 increase] repeat till end of the round (12 stitches).
  • Round 8: [1 sc, 1 increase] repeat till end of the round (18 stitches).
  • Round 9: Only 1 sc and 1 slip stitch.
  • Finish: Cut the yarn generously and leave a long tail for sewing.

Assembling

Legs: After you’ve finished crocheting all pieces, start sewing the legs onto the body. Start sewing the first leg onto the body directly over the edge that was created by the round that was crocheted only into the back loop. Sew on the second leg 4 to 5 stitches left or right from the first leg, again just over the edge. Make sure to sew the legs onto the “corners” of the cube.

Arms: Sew the arms left and right onto the body. Do not sew the arms directly over the legs but slightly behind the legs.

Eyes: Attach the safety eyes after the 3rd stitch row counting from the top edge on the head. The eyes are 4 stitches apart from each other. Back to the crochet pattern.

Antenna: Sew the antenna centered onto the flat top of the head.

Receiver: Take a Capri thread and form a circle with it, same as if you would do a basic knot. Wind one end of the thread 3 times through the circle and then tighten.

Using a tapestry needle, pull both ends of the thread through the center of the receivers and fasten them on the inside with several knots. Cut the leftover threads.

Afterwards, sew the receivers right and left centered onto the sides of the head.

Eyebrows: Attach the eyebrows directly under the top edge on the head. To do this, pull the threads of both ends of the eyebrows through the head with a tapestry needle and let it come out on the back of the head. Cut off the threads and hide the leftovers inside the head.

Mouth: Embroider the mouth with a White thread centered below the eyes. Hide the remaining thread inside the head.

DONE!

Please visit the Shop for printable Patterns!